Painter

PAINT PROCEDURE

1. IDENTIFY PART - CHECK WITH PRINT TO VERIFY IDENTIFICATION

PREPARE FOR PAINT AS NECESSARY

3. PAINT ALL SIDES ATTAINABLE IN FRONT OF PAINT PLENUM

4. MOVE TO CRANE LOCATION, FLIP AND PAINT REMAINING SURFACE

5. PAINT COVERAGE SHOULD BE 2-3 MIL. WET TO OBTAIN 1 MIL. DRY

6. MARK EACH END PLATE WITH PART NUMBER IN WHITE PAINTSTICK

NOTE: THE DNR SHEETS MUST BE ACCURATELY COMPLETED DAILY BY THE PAINT DEPARTMENT WHEN SHEET IS COMPLETED IT MUST BE TURNED INTO THE SHOP OFFICE