New

WAX INJECTOR B

Howmet

remote work

United States, Texas, Wichita Falls

6200 Central East Freeway (Show on map)

Nov 21, 2024

Responsibilities

Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company's primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit www.howmet.com. Follow @howmet: Twitter, Instagram, Facebook, LinkedIn and YouTube.

Must be able to work 12 Hour Days during training and then nights on a rotating shift. (2 on 2 off, 3 on 2 off, 2 on 3 off)

Starting pay is $19.84 an hour with robust benefits.

JOB SUMMARY

Injection Operator B's are responsible for the following skills: inspection, engraving, 35-Ton, 50-Ton, ET-50 and SI-250 injection. Trainees must successfully complete written and practical assessment of skills/knowledge at end of skills training.

ESSENTIAL FUNCTIONS

Basic Computer Skills
Must be able to read and interpret Product Criteria (PC) and Activity Instructions (AI).
Must be able to function as a member of a team and be able to work under general supervision.
Must be able to maintain expected quality levels.
Comply with all site required policies and procedures, including but not limited to:
EHS, Quality, Code of Conduct and the Wichita Falls Employee Handbook.

JOB RESPONSIBILITIES

1. Repetitive injection and control of wax patterns and sprues.
2. Performs inspection of all patterns and sprues. Determines whether to accept, reject, or repair the pattern per documented instructions.
3. Follows established protocol for notification of potential deviations or scrap trends.
4. Performs set-up of dimensional gauges.
5. Utilizes the necessary fixturing or gauges to ensure dimensional conformance of the patterns, molds, cores, etc. to specified tolerances.
6. Prepares sprues as required and locates ceramic bracing per engineering specification.
7. Performs specified operations during injection cycle.
8. Torch sprues, seal and pour cup. Add bracing as required per engineering specifications.
9. Maintains necessary supplies for the area to maximize productivity.
10. Must pay close attention to detail.
11. Sets up equipment as required to perform specific activities.
12. Follow 5S rules and procedures.
13. Utilize help chain when needed. (Human Performance, BOLO)
14. Works overtime as needed.
15. Performs other duties as required.

ENVIRONMENTAL HEALTH AND SAFETY RESPONSIBILITES

Comply with all department, facility, corporate and regulatory EHS regulations
Wear all required personal protective equipment (PPE). Requires wearing safety glasses, gloves and Metatarsal shoes.
Report all job-related illness and injuries (Per Employee Handbook).
Report all safety, health and environmental concerns to your supervisor in a timely manner.
Attend all EHS training.

PHYSICAL DEMANDS/EQUIPMENT USED

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Employee is required to execute the following:

Stair climbing.
Reaching near, far and overhead.
Pushing pulling, twisting and handling.
Be able to lift from floor-to-waist, waist-to-chest and chest-to-overhead
Be able to finger press, use a keyboard, mouse and tolerate hand/arm vibration
Gripping and Pinching
Carry items with two hands.
Carry items with one hand.
Work requires moderate physical effort including prolonged standing.
Squatting/crouching/bending when retrieving stored items from lower shelves, moving equipment and product inspections.
lifting >5 Lbs.
Must pass Jaeger I eye exam.

Equipment Used:

Injection Machine
Hot Plates
Hand tools
Engraving Machine
Gauging Fixtures

Work Environment:

Works in air-conditioned area.
Slight exposure to chemicals, fumes, oil, dust, noise and heat or cold

MEDICAL SURVEILLANCE REQUIREMENTS:

Vision

,
Qualifications

Qualifications - External

BASIC QUALIFICATIONS:

High School Diploma or GED from an accredited institution.
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.

PREFERRED QUALIFICATIONS:

Basic Computer skills
Minimum of 1 year of wax experience is preferred.

,
About Us

About Howmet Aerospace

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at www.howmet.com/esg-report.

Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.

Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.

If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com

,
About the Team

The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

,
Job Info

Job Identification
110749
Job Category
Operations
Posting Date
11/20/2024, 10:05 PM
Locations

PO Box 1616, 6200 Central Frwy, Wichita Falls, TX, 76307-1616, US
Job Schedule
Full time
Remote Work Schedule Availability?
None
Export-Controlled Data
This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items