Working Title: Painter
Personnel Program Code: Professional & Support Staff
Department: Maintenance Services
Department Head: Christopher Pillen
Supervisor: Joseph Dyer
FLSA: Non Exempt
HEERA Code: All others, Not Confidential
Grade: Not Specified
Position(s) Directly Supervised (if applicable)
Level of Supervision Received
Supervision - The incumbent performs a variety of routine duties within established policies and procedures or by referral to the supervisor’s guidelines.
Position Custom Scope
Reporting to the Maintenance Supervisor in the Facilities Services Maintenance Department, the Painter is a skilled trades position supporting the painting needs of the University of California, Riverside campus. The painter is responsible for coordinating and communicating with campus customers to understand their needs and fulfill work order requests for painting services. Painting services may occur indoors, outdoors, in and on structures, street postings, signs, asphalt, and curbs. This position also coordinates with other skilled trades in preparing the campus' new builds for launch and occupancy.
Key Responsibilities
| Description | % Time |
|---|
| Painting Maintenance & Repair: Prepares various surfaces (wood, metal, plaster, sheet rock, Vaughn wall, masonry, etc.) for painting including, but not limited to, washing, dewaxing, patching, plastering, caulking, taping, glazing, repairing, sanding and scraping; removes wall hangings, screws, wall anchors, repairs surfaces, removes old paint, fills holes/cracks/joints with putty, plaster and other fillers, in preparation of painting. Removes and installs wall plates, as necessary for the painting. Applies paints, stains, varnishes, lacquers, enamels, other topcoats and finishes with rollers, brushes and sprayers. Etches galvanized metal prior to priming. Performs body work, such as using automotive body fillers on various types of metal desks, cabinets, etc. Applies proper primers and flash bonds for priming metal surfaces. Removes old finishes with paint removers. Patches, sands wood cabinets and furniture. Mixes and blends penetrating lacquers and stains. Sprays lacquers, sanding sealers, oil sealers, polyurethane varnishes and other finishes (epoxy, alkyd, acrylic, enamel, zolatone, etc.). Installs minor finish carpentry such as trim, moldings and baseboard. Mixes paints by formulas and/or hand matching colors. Selects proper primers and finishes for each job. Utilizes the proper equipment including but not limited to rollers, spray guns/pumps, pressure pots, spray paint, high volume low pressure (HVLP) sprayer/airless and conventional paint sprayers. |
65 % |
| Painting Equipment Maintenance & Repair: Maintains and repairs equipment, sprayers, sanders, paint shakers, etc. Maintains paint spray equipment and temporary peel-off coatings on walls and ceilings. Maintains knowledge of building and safety codes; chemical make-up of paints, removers, and solvents common to the trade; environmental rules and regulations; and proper handling and disposal of hazardous materials. |
10 % |
| Communication & Customer Service: Serves as liaison with clients, relaying their needs and requirements to the appropriate department or supervisor. Maintains a positive attitude and communicates effectively with colleagues, supervisors, staff, faculty and students. Communicates and reports to a supervisor and/or staff regarding any potential issues, not limited to potential safety hazards (e.g. broken glass, regulated materials, damaged steps, excess water, fire, etc.), or liabilities during the day-to-day operations. Consults with supervisor for technical information, as needed. Interprets prints, schematics, wiring diagrams, flow charts and written descriptions of functions and project requirements. Works with customer and campus personnel to accurately define the nature of any issues, determine the appropriate course of action, make recommendations and follow up to ensure resolution has been effective. |
10 % |
| Shop Support: Performs computer input within the work order system for recording of labor and materials used in work performed. Maintains clear and accurate documentation of all inspections, testing and maintenance performed. Updates equipment documentation, specifications and drawings as needed. Collaborates with other skilled trades and Facilities Services team members to complete minor renovation projects and maintenance projects. Maintains and cleans work truck and shop. Maintains organization of materials and tools; performs routine maintenance or coordinates for repair or replacement of tools and equipment, as required. Accounts for shop parts/supplies inventory and reports supply needs to be restocked. Supports maintenance projects and programmatic work assignments. Adheres to the scheduling and completion of work assignments through the work order system. Participates in safety and other trainings as required. Performs all job duties in adherence to all University and Departmental safety guidelines. |
10 % |
| Abatement: Performs lead abatement, as necessary, to safely remove lead based paints from interior/exterior surfaces, while observing all government/University regulations, safety procedures and building codes. |
5 % |
Education & Experience
Education Requirements
| Degree | Requirement |
|---|
| High School Diploma. |
Preferred |
Experience Requirements
| Experience | Requirement |
|---|
| 4 years of journey-level experience in the painting skilled trade related to maintenance repair and construction. |
Required |
| Experience with proper usage of colorants, paints, primers, solvents, patching compounds, sealers, lacquers, enamels, epoxies, and thinners. |
Preferred |
| Experience in safe and proper procedures with removal/abatement of lead based paint. |
Preferred |
| Experience operating shop equipment, power and hand tools common to the skilled trade, including but not limited to: rollers, brushes, airless and conventional sprayers, hammers, screwdrivers, sanders, scrapers, grinders, wall texturing machines, pressure washers, etc. |
Required |
Licenses Requirements
| License | Requirement |
|---|
| Valid Driver License. |
Required |
Certifications Requirements
| Certification | Requirement |
|---|
| Lead abatement certification. |
Preferred |
| Certification of training in fork lifts, lifts, and/or boom truck operations. |
Preferred |
| Completion of a certified apprenticeship program. |
Preferred |
Educational Condition Requirements
| Educational Condition | Requirement |
|---|
Knowledge, Skills & Abilities
| Description | Requirement |
|---|
| Ability to work from ladders, scaffolds, man-lifts, and boom trucks at varying heights of up to 25 feet above grade; lift up to 75 pounds; perform repetitive lifting, bending, stooping, climbing, kneeling, pushing, pulling and reaching. Able to lift, load, carry, move and manipulate various building materials; work in areas where noise levels may exceed 90 dB. |
Required |
| Ability to record information accurately as is necessary to perform the job responsibilities. |
Required |
| Knowledge and ability to properly and safely work with colorants, paints, primers, solvents, patching compounds, sealers, lacquers, enamels, epoxies, and thinners. |
Required |
| Ability to estimate time, methods and materials needed from construction documents. Able to read and understand documents such as complex technical procedures, work instructions, blue prints, plans, manuals, specifications, and diagrams. |
Required |
| Ability to read, write, and perform basic arithmetic calculations. |
Required |
| Ability to follow verbal and written instructions, effectively communicate, and understand safety regulations and hazards. |
Required |
| Ability to withstand frequent exposure to extreme temperature conditions up to 125 degrees F (boiler rooms, steam pits, outdoor weather, etc.). Able to work in confined and dusty spaces and wear respirator or other required safety gear. Able to work outdoors in extreme and inclement weather conditions ranging from high heat with humidity, to freezing, rainy, and windy conditions. Able to work around and be exposed to unpleasant sights and smells, dangerous and/or hazardous substances. Ability to follow safety precautions and utilize appropriate safety devices, equipment and gear to safely perform duties with exposure to environmental requirements. |
Required |
| Ability and willingness to work weekends and holidays, occasional scheduled and unscheduled overtime, emergency call-back, and a flexible schedule as needed. |
Required |
| Ability to communicate and work effectively with co-workers, supervisors, general public, and provide exceptional customer service. |
Required |
| Ability to prioritize work orders, routine work, emergency requests along with choose the proper materials or equipment to accomplish work in the most expeditious and safe manner. |
Preferred |
| Knowledge and ability to properly and safely apply proper procedures with removal/abatement of lead based paint. |
Preferred |
| Knowledge of UC/UCR policies and systems. |
Preferred |
| Basic knowledge and technical skills with computer programs and applications (i.e. Microsoft Word, Excel, Design Cad 2, etc.). |
Preferred |
| Knowledge in safe and proper procedures when hazardous materials are suspected. |
Preferred |
Special Requirements & Conditions
| Special Requirements & Conditions | Requirement |
|---|
| Public Driving Record. |
Required |
| Overtime. |
Required |
| Shift Work (hours outside standard Mon-Fri 8AM-5PM work hours). |
Required |
| Hired candidate must successfully pass a background check prior to appointment start date. |
Required |
| Must wear University issued ID badge and uniform. |
Required |
| Must possess or obtain a Valid CA Driver License in accordance with the California Department of Motor Vehicles. |
Required |
Environment
Working Environment
Items Used & Other Requirements
Items Used
- Standard Office Equipment.
- Boom lifts, scissor lifts, and forklift.
- Personal Protective Equipment (PPE).
- Rollers, brushes, airless and conventional sprayers, hammers, screwdrivers, sanders, scrapers, grinders, wall texturing machines, pressure washers, etc.
- Pickup truck, light truck, heavy utility trucks, and other University vehicles.
- Variety of hand and power tools, building tools, materials and equipment associated with painting skilled trade.
- Two-way radio.
Physical Requirements
- Bend:Frequently
- Sit:Occasionally
- Squat:Occasionally
- Stand:Constantly
- Crawl:Occasionally
- Walk:Frequently
- Climb:Occasionally
Mental Requirements
- Read/Comprehend:Frequently
- Write:Occasionally
- Perform Calculations:Occasionally
- Communicate Orally:Frequently
- Reason & Analyze:Constantly
Environmental Requirements
- Is exposed to excessive noise:Yes
- Is around moving machinery:Yes
- Is exposed to marked changes in temperature and/or humidity:Yes
- Drives motorized equipment:No
- Works in confined quarters:Yes
- Dust:Yes
- Fumes:Yes
Critical Position
Is Critical Position: Yes
|
UC Riverside
$39.08 - $43.98 per hour
Full Benefits Package
Oct 23, 2024